Models
|
| VM-4 |
Vmirror 4G, 4Gbit/sec two-engine, clustered appliance with read/write caching in 1U chassis |
| VM-1 |
2Gbit/sec, single-engine appliance in 1U chassis |
| VM-2 |
Two-engine clustered appliance in 1 U chassis |
|
Fiber
Connectivity |
ANSI/IS Protocol/Topology Standards
ANSI Fibre Channel (FC-PH, FC-PH-2, FC-PH-3, FC-PLDA, FC-FLA)
ANSI Fibre Channel Arbitrated Lp (FC-PLDA, FC-AL, FC-AL-2)
ANSI Fibre Channel Fabric (FC-FLA, FC-GS-2)Classes of Service: Class 3
Data Transfer Rate: 1 or 2 Gb/sec
Port Type: N(L)_Prt Dual 2Gb
Fibre Channel ports (SFP):
Port A designated for host/initiator connectivity
Port B designated for storage/target and inter-module connectivity
|
| Serial
Port Connectivity |
Protocol: Serial Transmission
Speed: 115200 baud
Connector DB-9
|
| Ethernet
Port Connectivity |
Speed: 10base-T/100base-TX
Connector RJ-45
Protocol: TCP/IP
Compatible Vmirror Admin management package, Telnet, FTP
|
| Operating
Environment |
Operating voltage: 100 to 240 VAC; 50 to 60 Hz
Power: 75W maximum continuous power
Temperature: +5C to +40°C (41 to 104°F)
Humidity: 8% t 80% (non-condensing)
|
| Mechanical |
Model VM-4, 26 pounds (11.81 kg)
Model VM-1, 24 pounds (10.91 kg)
Model VM-2, 26 pounds (11.82 kg)
1U rack-optimized chassis
1.75 inches (4.445 cm) high
17.0 inches (43.2 cm) wide
27.25 inches (69.215 cm) deep
Redundant hot-swap power supplies with integrated cooling fans
Integral power supply with Power Plus SSI connector
Front-to-back air pattern
|
| Safety
Standards |
UL 60950
IEC 60950
EN 60950
|
| Emission
Standards |
FCC Part 15, Class A
ICES-003 Class A
VCCI Class A
EN 55022 Class A
|
